Product ID:A5 ECONOLINE FILMS
MSDS Date:07/01/1988
FSC:6750
NIIN:00F016896
MSDS Number: BKTPW

ANITEC IMAGE CORPORATION

40 CHARLES STREET
BINGHAMTON, NY 13902

Emergency Phone: (607) 774-3242 OR 774-3300

Info Phone: (607) 774-3242

Cage: 61263

ANITEC IMAGE CORP

4444 BINGHAMTON, NY 13902 US

Telephone: 607-774-3333

Cage: 61263

CELLULOSE TRIACETATE

CAS: 9012-09-3

Fraction By Weight: >90%

SILVER CHLORIDE

CAS: 9007-35-6

RTECS: VW3675000

ACGIH TLV: 10 MG/CUM

SILVER BROMIDE

CAS: 7785-23-1

ACGIH TLV: 10 MG/CUM

GELATIN, GELATINE

CAS: 9000-70-0

RTECS: LX8580000

CADMIUM CHLORIDE (SARA III)

CAS: 10108-64-2

RTECS: EV0175000

Fraction By Weight: TRACE

OSHA PEL SEE 1910.1027

ACGIH TLV: 0.05 MG(CD)/M3; 9293

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: THIS PRODUCT CONTAINS SMALL
AMOUNTS OF A CADIUM SALT & MAY CAUSE LOCALIZED IRRITATION.
Explanation of Carcinogenicity:CADMIUM IS A SUSPECTED 2B CARCINOGEN.
Effects of Overexposure:SKIN: THIS PRODUCT CONTAINS SMALL AMOUNTS OF A
CADMIUM SALT & MAY CAUSE LOCALIZED IRRITATION.

First Aid:INHALATION: REMOVE FROM SOURCE OF EXPOSURE. SKIN: WASH
THOROUGHLY W/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NONE
Extinguishing Media:WATER MIST, ALCOHOL FOAM, CO2, OR DRY CHEMICAL

Spill Release Procedures:UNEXPOSED FILM SHEETS MAY BE REPACKAGED FOR
FUTURE USE.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE AWAY FROM
HEAT, RADIATION OR LIGHT SOURCES. DON'T IMMERSE INTO WATER OR
CHEMICALS PRIOR TO PROCESSING.
Other Precautions:AVOID EXPOSURE TO SOLUTIONS & INHALATION OF
COMBUSTION FUMES.

Protective Gloves:DISPOSABLE COTTON
Work Hygienic Practices:WASH HANDS AFTER HANDLING FILM/FOLLOWING
EXPOSURE TO FILM PROCESSING SOLUTIONS.
Supplemental Safety and Health

Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Evaporation Rate & Reference:(BU AC = 1): NEGLIGIBLE
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY EMULSION COATED FILM W/NO DISTINGUISHING ODOR.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, LIGHT & OTHER RADIATION SOURCES

Waste Disposal Methods:DISPOSAL OF FILM & FILM PROCESSING SOLUTIONS
SHOULD BE MADE IN CONFORMANCE W/APPLICABLE LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.